The GAMMA end clamp is designed, together with its accessories, to optimise the performance of G-, H- and I-profiles.
It is quickly and easily fastened directly from above. The clamp is supplied as a pre-assembled kit complete with screw, spring and special nut, all in stainless steel.
This product can be produced in the various RAL colours on request of the client
TECHNICAL DETAILS
| Code | Material | Size ( mm ) | ||||||||||||||||||
| Clamp | Access. | H | L | Screw | ||||||||||||||||
| ST-50-A | Aluminium | Stainless Steel | 30 | 50 | VTCE – 8×25 | |||||||||||||||
| ST-50-B | Aluminium | Stainless Steel | 32 | 50 | VTCE – 8×25 | |||||||||||||||
| ST-50-C | Aluminium | Stainless Steel | 34 | 50 | VTCE – 8×25 | |||||||||||||||
| ST-50-D | Aluminium | Stainless Steel | 36 | 50 | VTCE – 8×25 | |||||||||||||||
| ST-50-E | Aluminium | Stainless Steel | 38 | 50 | VTCE – 8×25 | |||||||||||||||
| ST-50-F | Aluminium | Stainless Steel | 40 | 50 | VTCE – 8×25 | |||||||||||||||
| ST-50-G | Aluminium | Stainless Steel | 42 | 50 | VTCE – 8×25 | |||||||||||||||
| ST-50-H | Aluminium | Stainless Steel | 44 | 50 | VTCE – 8×25 | |||||||||||||||
| ST-50-I | Aluminium | Stainless Steel | 46 | 50 | VTCE – 8×25 | |||||||||||||||
| ST-50-J | Aluminium | Stainless Steel | 48 | 50 | VTCE – 8×25 | |||||||||||||||
| ST-50-K | Aluminium | Stainless Steel | 50 | 50 | VTCE – 8×25 | |||||||||||||||
PROPERTIES OF GAMMA ALUMINIUM PROFILE MATERIALS
| Material type | EN AW 6060 |
| Tensile strength Rm (Mpa) | 190 |
| Elastic limit Rp 0.2 (Mpa) | 150 |
| Elongation at 50 mm (%) | 10 |
| HB hardness | 70 |
| Coefficient of linear thermal expansion between 20 oC and 100 oC (1/ oK) | 23×10-6 |
| Preparation for surface oxidation treatment | Excellent |
PROPERTIES OF SUPPORT MATERIALS
| Material type | AISI 304 |
| Shape | Cold-rolled |
| Finish | Heat treatment, pickled and skin-passed |
| Density kg/dm3 | 7,9 |
| Tensile strength N/mm2 | 540 – 750 |
| Elongation at 80mm (%) | 45 |
| HRB hardness | 82 |
| Material type | AISI 430 |
| Shape | Cold-rolled |
| Finish | Heat treatment, pickled and skin-passed |
| Density kg/dm3 | 7,7 |
Tensile strength N/mm2
| 450 – 600 |
|
| Elongation at 80mm (%) | 20 |
| HRB hardness | 85 |
